Does Soundproofing a concrete ceiling work?

Absolutely! The ReductoClip ceiling solution is a high performing solution for both airborne and impact noise. The ReductoClip Ceiling System is also designed to exceed the UK Part E Building Regulations for the passage of sound. (43dB or higher for airborne noise and 64dB or lower for impact noise). No soundproofing will offer 100% reduction. However, soundproofing a ceiling with the ReductoClip system will dramatically reduce the noise from noisy neighbours (e.g. heavy footsteps and loud airborne noise). *dB results will vary depending on several factors. Please see our dB blog on why dB results may vary

Is it better to soundproof the floor above, or the ceiling?

If possible, the recommendation would be to soundproof the floor above against impact noise (e.g. footsteps). Absorbing impact noise at source (before it enters the structure) can achieve a better result.

How much space is lost from the ceiling height with the ReductoClip Ceiling System?

The ReductoClip Ceiling System offers the slimmest solution at only 60mm (from the bottom of the timber batten to the final layer of plasterboard), whilst delivering the highest level of soundproofing.

Do you offer an installation service?

The ReductoClip System can be installed by a competent DIYer or general builder or tradesperson. Please see our dedicated installation page for more details on different installation options.

What lights can be fitted after soundproofing a ceiling?

Cutting holes into soundproofing is always going to create a weakness. Therefore, recessed lighting isn't advisable. Ideally slim LED surface mounted spotlights, or single pendant lighting fixed onto the ceiling is the preferred option over and above lighting inside of the ceiling.

ReductoClip Concrete Ceiling System with Timber Battens

ProSound ReductoClip

Concrete Ceiling System

Engineered for peace and quiet in your home

Buy Now

ProSound ReductoClip Concrete Ceiling System

Engineered for peace and quiet in your home

Buy Now

Designed For All Noise Problems

High level of sound reduction for all noise types

48dB

Impact noise performance

(See performance tabs below)

110mm Thick

For maximum performance

Simple To Decorate

Plasterboard finish ready to skim

DIY Installation

Straightforward and cost saving

ProSound™ ReductoClip Concrete Ceiling System

Tried, tested and proven to reduce unwanted noise from noisy neighbours. The ReductoClip Concrete Ceiling System (with timber battens) is engineered to enable you to achieve peace and quiet in your home.

The addition of high levels of mass and resilience help to dampen sound energy and vibration with minimal loss of height to the existing ceiling.

Whether you want peace and quiet from noisy neighbours or privacy in your own space, the ReductoClip Concrete Ceiling Solution is the perfect solution.

Download Brochure

Why Use The ReductoClip Concrete Ceiling System?

High level of sound reduction - giving you peace, quiet and privacy in your own home

Slimmest system of its kind - saving you space in your room

Straightforward DIY installation - saving you time and money, without the need of extra labour costs

Fast delivery lead times (3-5 working days) - no need to wait for a solution to your noise issue. We're here to make it happen swiftly and efficiently

Industry leading technical support - soundproof with confidence. Whatever the noise issue, whatever the question, we're here to help

Simple, DIY Installation

The ReductoClip Concrete Ceiling System has been carefully designed so that a competent DIYer can install the system themselves saving on installation costs.

For non DIYers, a local tradesperson such as a builder or joiner will have the necessary skill to install the system for you following our detailed installation guide and video.

Our team of highly trained and experienced soundproofing professionals are also on hand to offer technical support and answer any installation questions.

Installation Guide

Simple

DIY Installation

Technical Information

ReductoClip Concrete Ceiling Soundproofing Solution

110mm of high performing sound reduction engineering

1. ReductoClips - decouple the mass layers from the timber joists and act like a shock absorbing suspension system to dampen high levels of sound energy and vibration

2. ReductoClip Furring Channels - extra wide to make fixing acoustic plasterboards quicker and easier

3. Acoustic Mineral Wool - dampens sound within the cavity to stop sound amplifying

4. Acoustic Plasterboard - (2 layers) to increase the mass of the ceiling. More mass and density than standard plasterboard but with the same finishing and decorating techniques

5. FlexiSound 5 - viscoelastic membrane to add further mass to the ceiling. A different type of mass to reduce different sound frequencies to the other layers. FlexiSound also helps to dampen sound energy and vibration

6. Timber Battens - To support mineral wool and give a better fixing point for the ReductoClips

Download Brochure

Real World Site Test

Tested on 200mm concrete slab

Airborne Performance

(Higher the figure the better)

74dB (DnT,w)

70dB (DnT,w+Ctr) Includes correction for low frequency performance.

Airborne sound reduction of untreated concrete ceiling:

59dB (DnT,w) / 54dB (DnT,w+Ctr)

Airborne improvement with treatment:

15dB (DnT,w) / 16dB (DnT,w+Ctr)

Impact Performance

(Lower the figure the better)

48dB (LnT,w)

Impact sound reduction of untreated concrete ceiling:

76dB (LnT,w)

Impact improvement with treatment:

28dB (LnT,w)

See All Performance Data

Specifications

Total thickness of system: 110mm

Weight: 35.7kg per m²

Termal Conductivity:

Plasterboard 15mm: 0.25 W/mK
FlexiSound 5: 0.037 W/mK
60kg Acoustic Mineral Wool: 0.034 W/mK

Thermal Resistance, (R-Value):

Plasterboard 15mm: 0.060 m² K/W
FlexiSound 5: 0.14 m² K/W
50mm 60kg Acoustic Mineral Wool: 1.45 W/mK

Fire:

Plasterboard 15mm: EN13501-1: A2-s1, d0
FlexiSound 5: EN13501-1: C-s3, d0
60kg Acoustic Mineral Wool: EN13501-1: A1

Download Brochure

Full System Components:

Acoustic Mineral Wool

ReductoClip

Reducto Furring Bar

Acoustic Plasterboard

FlexiSound 5

Acoustic Sealant - 900ml

Jumbo Sealant Applicator Gun for 900ml tubes

Plasterboard Scrim Tape - 90m

Self-Drilling Drywall Screws 50mm x 3.5mm (pack of 200)

Self-Drilling Drywall Screws 25mm x 3.5mm (pack of 200)

10m Isolation Strip (Self Adhesive)

Packers 28mm x 5mm (Pack of 25)

Buy Now

Ready To Take The Next Step?

If you know what you want and are ready to proceed

Buy Now

If you need help calculating material quantities

Need some guidance? Speak to our friendly team of experts

We don’t expect you to become an overnight soundproofing expert, that’s what we’re here for.

Ceiling Soundproofing FAQs

Does Soundproofing a concrete ceiling work?

Absolutely! The ReductoClip ceiling solution is a high performing solution for both airborne and impact noise.
The ReductoClip Ceiling System is also designed to exceed the UK Part E Building Regulations for the passage of sound. (43dB or higher for airborne noise and 64dB or lower for impact noise).
No soundproofing will offer 100% reduction. However, soundproofing a ceiling with the ReductoClip system will dramatically reduce the noise from noisy neighbours (e.g. heavy footsteps and loud airborne noise).
*dB results will vary depending on several factors.
Please see our dB blog on why dB results may vary
Is it better to soundproof the floor above, or the ceiling?

If possible, the recommendation would be to soundproof the floor above against impact noise (e.g. footsteps). Absorbing impact noise at source (before it enters the structure) can achieve a better result.
How much space is lost from the ceiling height with the ReductoClip Ceiling System?

The ReductoClip Ceiling System offers the slimmest solution at only 60mm (from the bottom of the timber batten to the final layer of plasterboard), whilst delivering the highest level of soundproofing.
Do you offer an installation service?

The ReductoClip System can be installed by a competent DIYer or general builder or tradesperson.
Please see our dedicated installation page for more details on different installation options.
What lights can be fitted after soundproofing a ceiling?

Cutting holes into soundproofing is always going to create a weakness. Therefore, recessed lighting isn't advisable. Ideally slim LED surface mounted spotlights, or single pendant lighting fixed onto the ceiling is the preferred option over and above lighting inside of the ceiling.